Skip to Content
BROMPTON BICYCLES AUSTRALIA
Shop
Stockists
0
0
BROMPTON BICYCLES AUSTRALIA
Shop
Stockists
0
0
Shop
Stockists
Shop Sprocket set including chain guide disc 3/32'
brompton_bikes_australia_shop_SPARES_sprockets_Q101612.jpg Image 1 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101612.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101613.jpg Image 2 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101613.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101614.jpg Image 3 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101614.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101615.jpg Image 4 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101615.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101616.jpg Image 5 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101616.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101617.jpg Image 6 of 6
brompton_bikes_australia_shop_SPARES_sprockets_Q101617.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101612.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101613.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101614.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101615.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101616.jpg
brompton_bikes_australia_shop_SPARES_sprockets_Q101617.jpg

Sprocket set including chain guide disc 3/32'

from A$22.00
Size:
Type:
Quantity:
Get notified by email when this product is in stock.
Add To Cart
Chain 3-32'
Chain 3-32'
A$29.00
Length:

3-spline (3 speed) 13 Teeth: BWR 3 speed sprocket set

Not available as a factory fit option, but this sprocket stack lets you use your BWR (normally used as a 6 speed) with just 3 speeds - with a bigger jump between gears than using the derailleur in combination.
This is a kit of parts for the BWR sprocket stack for fixing to the Brompton / Sturmey Archer wide range (BWR) rear hub & contains the following parts:
Plastic chain guard, 13 tooth rear sprocket (3.1 mm) - Shimano splines, sprocket spacers (2.0mm & 2.0mm), circlip, fitting diagram

3-spline (3 speed)14 Teeth:BWR 3 speed sprocket set 14 Teeth

Running a Brompton / Sturmey Archer rear hub with 14 teeth and worn out the teeth on your rear sprockets?
Then this is the replacement kit for you - unless you have a BWR hub, in which case you need the BWR stack.

9-spline (2 or BWR 6 speed) 12/16 Teeth: Brompton 2-speed sprocket set 12/16T

Brompton 12/16T sprocket set (Shimano splines) for 2 speed / Urban rear wheel.
This sprocket set comprises the following kit for fixing to the Brompton 2 speed rear wheel.Sprocket set kit comprises:
Chainguard, 16 tooth rear sprocket, 12 tooth rear sprocket, sprocket spacer, circlip set, fitting instructions

9-spline (1 or BWR as a 3 speed) 12 Teeth: Brompton single speed sprocket set 12 tooth

Running a Brompton single speed rear wheel and worn out the teeth on your rear sprocket?
Then this is the replacement kit for you.
Comprises the following kit for fixing to the Brompton single speed rear wheel. (note this is the same wheel as the two speed):
Sprocket set kit comprises: Plastic chainguard, 12 tooth rear sprocket, sprocket spacer, circlip set, fitting instructions

9-spline (2 or BWR 6 speed) 13/16 teeth: Brompton BWR 6 speed sprocket set (13T/16T)

This is a kit of parts making the BWR sprocket stack for fixing to the Brompton / Sturmey Archer wide range (BWR) 6 speed rear wheel hubAlso as used on the Brompton Electric 6 speed rear wheel
Sprocket set kit comprises:0.85mm nylon chain guard / dust cap- splined, 16 tooth rear sprocket - 1.8mm - 9 splines, Sprocket pacer - 2.2mm, 13 tooth rear sprocket - 3.1mm - 9 splines, Circlip / split ring, Sturmey Archer ,fitting diagram

9-spline (1 or BWR as a 3 speed) 13 Teeth:BWR 3 speed sprocket set

Not available as a factory fit option, but this sprocket stack lets you use your BWR (normally used as a 6 speed) with just 3 speeds - with a bigger jump between gears than using the derailleur in combination.
This is a kit of parts for the BWR sprocket stack for fixing to the Brompton / Sturmey Archer wide range (BWR) rear hub and contains the following parts:
Plastic chain guard, 13 tooth rear sprocket (3.1 mm) - Shimano splines, sprocket spacers (2.0mm & 2.0mm), circlip, fitting diagram

You Might Also Like

Cable Gatherer
Cable Gatherer
A$11.00
Brompton Advance Single Speed Sprocket Set - for T Line & P Line
Brompton Advance Single Speed Sprocket Set - for T Line & P Line
A$23.65
Superlight Direct Mount Chainring 56T - for T Line
Superlight Direct Mount Chainring 56T - for T Line
A$222.00
Spring set and cable stop for Gear Trigger (Pre 2017)
Spring set and cable stop for Gear Trigger (Pre 2017)
A$27.00
Replacement Chain Ring and Guard Only - Spider Type brompton_bikes_australia_shop_SPARES_chain_ring_Q100008.jpg brompton_bikes_australia_shop_SPARES_chain_ring_Q100009.jpg brompton_bikes_australia_shop_SPARES_chain_ring_Q100165.jpg brompton_bikes_australia_shop_SPARES_chain_ring_Q100179.jpg brompton_bikes_australia_shop_SPARES_chain_ring_Q100213.jpg
Replacement Chain Ring and Guard Only - Spider Type
from A$59.00

Our Brompton Blog

Terms & Conditions

Contact us

sales@aybtrading.com

+1800 15 65 95