Pedal - Non folding - Right Hand

Brompton right hand pedal (as you sit on the bike) - non-folding (it's the left hand one that folds)

Note: Scales not included

The spindle even has some little detailing - a picture of an unfolded Brompton on one side and a folded Brompton on the other 

Note: The thread on the right hand pedal means that you do it up in the normal way - turn clockwise (or to the right if you don't wear a watch). This means that over time (as you pedal) the thread could become tighter and tighter - which may make it difficult to remove (that's why you should grease the pedal thread when installing it)

Tools required:

Either:

15mm thin spanner (preferably a pedal wrench / spanner to give good leverage as pedals can become screwed on pretty tight after years of hard pushing) for removal

or: 6mm Allen key / hex red (accessed through the hole in the pedal crank) - apply some grease to the thread to make future removal easier

Grease

Installation method:

Hand tighten the pedal first before using a tool to fully tighten to make sure it is not cross threaded

The thread does up in the normal clockwise direction on this pedal if you are using a spanner, but if you are on the reverse side using an Allen key, this will be reversed

The pedal should be tightened to 30Nm